3.5mm Connector Series

Best Sale

OVER 26 YEARS OF 3.5mm Connector Series DESIGNING, MANUFACTURING AND ASSEMBLING | Bo-Jiang

BO-JIANG TECHNOLOGY CO., LTD., since 1992, is a 3.5mm Connector Series designing, manufacturing and assembling manufacturer based in Taiwan.

The quality control system in Bo-Jiang is divided into IQC, IPQC, FQC, and OQC that strictly monitor the stage from material-incoming to the final stage. All factors are considered to match the RF connector and the Cable to the best state and to meet customers' requirements such as VSWR, Return Loss, and Insertion Loss.

Bo-Jiang's connector and cable are manufactured in accordance with ISO9001, ISO 14001, and IECQ QC080000 certifications. Besides, our products would be verified by international standards such as MIL, and IEC. Precision of our connector could be controlled no more than 0.003mm, including plating thickness. Our Network Analyzers (up to 110 GHz) could support our development of higher frequency series. Our company also have flexble and precise production facilities to support customers.

Bo-Jiang has supported customers high-quality products since 1992. Based on our advanced technology and experience, Bo-Jiang would ensure each customer's demands can be fulfilled.

3.5mm Connector Series

3.5mm Series
3.5mm Series

3.5mm RF/Microwave coaxial series was designed with highly rugged physical interfaces in mind that would mate with SMA dimensions, allowing thousands of repeatable connections. The performance is up to 34 GHz. The outer contact ID is 3.5 mm, and OD is 4.55 mm. The 3.5mm series is compatible with 2.92mm and SMA series. When mated with SMA and other precision SMA type connectors the performance is limited by the connector with lesser performance.

Specification

ELECTRICAL
  Impedance  50 ohm
  Frequency Range  0 ~ 34 GHz
  Working Voltage  335 VRMS Max.
  Dielcectric Withstanding Voltage  1000 VRMS Min.
  Insetion Loss  0.04 x √F(GHz) dB Max.
  VSWR 

  1.15 Max. 

  Contect Resistance  Center Contact  3 Milliohms Max.
  Outer Connect  2.5 Milliohms Max.

MATERIAL
    Part Name    Material    Finish
    Body, Metal Part    Stainless Stell    Passivated
    Center Contact    Beryllium Copper    Gold 50 micro-inches
    Insulator    Rexolite, Ultem 1000, PCTEE    None

MECHANICAL & ENVIRONMENTAL
Coupling Torque

     Recommended     

     0.8 Nm to 1.1 Nm                    

     Proof

     1.7 Nm
        Durability (Mating) 

     500 cycles Min.

        Temperture Range         -55°C thru 125°C

Interface  Mating Dimensions

3.5mm INTERFACE MATING DIMENSIONS

Result 1 - 4 of 4

Result 1 - 4 of 4