TERMINATOR | Coaxial Connectors Designing | Manufacturing | Assembling

Best Sale

OVER 26 YEARS OF COAXIAL CONNECTORS DESIGNING, MANUFACTURING AND ASSEMBLING | Bo-Jiang

BO-JIANG TECHNOLOGY CO., LTD., since 1992, is a RF/ Microwave Coaxial Connector designing, manufacturing and assembling manufacturer based in Taiwan.

The quality control system in Bo-Jiang is divided into IQC, IPQC, FQC, and OQC that strictly monitor the stage from material-incoming to the final stage. All factors are considered to match the RF connector and the Cable to the best state and to meet customers' requirements such as VSWR, Return Loss, and Insertion Loss.

Bo-Jiang's connector and cable are manufactured in accordance with ISO9001, ISO 14001, and IECQ QC080000 certifications. Besides, our products would be verified by international standards such as MIL, and IEC. Precision of our connector could be controlled no more than 0.003mm, including plating thickness. Our Network Analyzers (up to 110 GHz) could support our development of higher frequency series. Our company also have flexble and precise production facilities to support customers.

Bo-Jiang has supported customers high-quality products since 1992. Based on our advanced technology and experience, Bo-Jiang would ensure each customer's demands can be fulfilled.

View our quality products ADAPTOR, BNC, BT43, Cable Terminator, CLAMP, CRIMP, FAKRA, FME, Jack to Jack, Jack to Plug, MCX, MMCX, PAL, PANEL MOUNT, PCB, Phase Match Cable, Plug to Jack, Plug to Plug, RCA, Reverse Polarity, SMA, SMC, SMP, SMPM, SMT, SOLDER, SSMB, SURGE ARRESTER, TERMINATOR, TNC, TRB, TWIST, UHF and feel free to Contact Us.

Result 1 - 23 of 23

BNC SERIES TERMINATOR
Terminators are generally used at the end of the cables. To use BNC terminator could absorb the electrical energy of the signal, the resistance should match characteristic impedance of the coaxial cable and RF coaxial connectors as the signal enters and avoid reflection of signals. In specification, the frequency of impedance in 75 ohm is DC to 3GHz and in 50ohm is DC to 2GHz. The VSWR (Voltage Standing Wave Ratio) is 1.2 maximum of 50 ohm at 2GHz and is 1.1 maximum of 75 ohm at 3GHz. The power rating includes 1/4 watt, 1/2 watt and 1 watt.
F TYPE MALE TERMINATOR WITH OUT CHAIN
Bo Jiang provides various F type RF coaxial asseccories include terminiators, protective cap and others for your application.
F TYPE FEMALE TERMINATOR WITH OUT CHAIN
Bo Jiang provides various F type RF coaxial asseccories include terminiators, protective cap and others for your application.
N TYPE MALE TERMINATOR WITH OUT CHAIN
Bo Jiang provides N type plug terminator reliably prevent RF signals reflected to deduce interference.
TNC MALE TERMINATOR WITHOUT CHAIN
TNC FEMALE TERMINATOR WITHOUT CHAIN
SMB TERMINATOR PLUG
TERMINATORIVE CAP W/O CHAIN
CABLE TERMINATOR BULKHEAD CRIMP
BULKHEAD, REAR MOUNT W/ GASKET
CABLE TERMINATOR BULKHEAD CRIMP
BULKHEAD, REAR MOUNT W/ GASKET
CABLE TERMINATOR END LAUNCH CRIMP
END LAUNCH
CABLE TERMINATOR END LAUNCH CRIMP
END LAUNCH
CABLE TERMINATOR R/A PCB MOUNT CRIMP
CABLE TERMINATOR R/A PCB MOUNT CRIMP
CABLE TERMINATOR PCB MOUNT CRIMP
CABLE TERMINATOR PCB MOUNT CRIMP
CABLE TERMINATOR PCB MOUNT CRIMP
CABLE TERMINATOR PCB MOUNT CRIMP
CABLE TERMINATOR PCB MOUNT CRIMP
CABLE TERMINATOR PCB MOUNT DIRECT SOLDER
BNC Connector Accessories
Bo Jiang's BNC RF terminators versions are available DC to 18 GHz and match to 50 ohms and 75 ohm characteristic impedance. Our N type terminator reliably prevent RF signals reflected to deduce interference.
N type Connector Accessories
Bo Jiang's N type RF terminators versions are available DC to 18 GHz and match to 50 ohms and 75 ohm characteristic impedance. Our N type terminator reliably prevent RF signals reflected to deduce interference.
MMCX Connectors Accessories
Bo Jiang's MMCX RF coaxial series provides virious asseccories for your application.
RF Cable Terminator