A professional RF/ Microwave Coaxial connectors designing, manufacture and assembling factory in the world.

Best Sale

OVER 26 YEARS OF COAXIAL CONNECTORS DESIGNING, MANUFACTURING AND ASSEMBLING | Bo-Jiang

BO-JIANG TECHNOLOGY CO., LTD., since 1992, is a RF/ Microwave Coaxial Connector designing, manufacturing and assembling manufacturer based in Taiwan.

The quality control system in Bo-Jiang is divided into IQC, IPQC, FQC, and OQC that strictly monitor the stage from material-incoming to the final stage. All factors are considered to match the RF connector and the Cable to the best state and to meet customers' requirements such as VSWR, Return Loss, and Insertion Loss.

Bo-Jiang's connector and cable are manufactured in accordance with ISO9001, ISO 14001, and IECQ QC080000 certifications. Besides, our products would be verified by international standards such as MIL, and IEC. Precision of our connector could be controlled no more than 0.003mm, including plating thickness. Our Network Analyzers (up to 110 GHz) could support our development of higher frequency series. Our company also have flexble and precise production facilities to support customers.

Bo-Jiang has supported customers high-quality products since 1992. Based on our advanced technology and experience, Bo-Jiang would ensure each customer's demands can be fulfilled.

Result 1 - 24 of 49
123
  • SMP MALE, SOLDER TYPE
    SMP MALE, SOLDER TYPE

    Bo-Jiang's SMP connectors are compatible with all kinds of SMP connectors, including Corning Gilbert's GPO™ products. SMP male RF/Microwave coaxial connectors for soldering type are available in semi-rigid cable group include 0.085", 0.086" and 0.047". These rear mount mode connectors could assemble bulkhead with your device to match your application. In electrical specification, the impedance in 50 ohm, the frequency is DC to 40GHz in straight shaped, the working voltage is 335 VRMS and the dielectric withstanding voltage is 500 VRMS.VSWR (Voltage Standing Wave Ratio) is 1.2 maximum form DC~ 18GHz, VSWR is 1.35 maximum from 18GHz ~ 26.5GHz, VSWR is 1.7 maximum form 26.5GHz ~ 40GHz.

  • SMP MALE, RIGHT ANGLE, PCB MOUNT
    SMP MALE, RIGHT ANGLE, PCB MOUNT

    Bo-Jiang's SMP connectors are compatible with all kinds of SMP connectors, including Corning Gilbert's GPO™ products. PCB mounting type of SMP RF/Microwave coaxial connectors were suitable to solder on your Printed circuit Board (PCB) design are available in right angle configurations. In electrical specification, the impedance in 50 ohm, the frequency is DC to 12GHz in right angle shaped, the working voltage is 335 VRMS and the dielectric withstanding voltage is 500 VRMS.VSWR (Voltage Standing Wave Ratio) is 1.45 maximum form DC~ 12GHz.

  • SMP MALE, PCB MOUNT
    SMP MALE, PCB MOUNT

    Bo-Jiang's SMP connectors are compatible with all kinds of SMP connectors, including Corning Gilbert's GPO™ products. PCB mounting type of SMP RF/Microwave coaxial connectors were suitable to solder on your Printed circuit Board (PCB) design are available in vertical configurations. In electrical specification, the impedance in 50 ohm, the frequency is DC to 12GHz in straight shaped, the working voltage is 335 VRMS and the dielectric withstanding voltage is 500 VRMS.VSWR (Voltage Standing Wave Ratio) is 1.45 maximum form DC~ 12GHz.

  • SMP MALE, END LAUNCH CONNECTOR, SURFACE MOUNT
    SMP MALE, END LAUNCH CONNECTOR, SURFACE MOUNT

    Bo-Jiang's SMP connectors are compatible with all kinds of SMP connectors, including Corning Gilbert's GPO™ products. In printed circuit board application, SMP RF/Microwave coaxial end launch connectors could mount on the edge of printed circuit board. In electrical specification, the impedance in 50 ohm, the frequency is DC to 12GHz in straight shaped, the working voltage is 335 VRMS and the dielectric withstanding voltage is 500 VRMS.VSWR (Voltage Standing Wave Ratio) is 1.45 maximum form DC~ 12GHz.

  • SMP MALE, SURFACE MOUNT
    SMP MALE, SURFACE MOUNT

    Bo-Jiang's SMP connectors are compatible with all kinds of SMP connectors, including Corning Gilbert's GPO™ products. Surface mounting type of SMP RF/Microwave coaxial connectors were suitable to solder on the surface of Printed circuit Board (PCB) design are available wave soldering process. In electrical specification, the impedance in 50 ohm, the frequency is DC to 12GHz in straight shaped, the working voltage is 335 VRMS and the dielectric withstanding voltage is 500 VRMS.VSWR (Voltage Standing Wave Ratio) is 1.45 maximum form DC~ 12GHz.

  • SMP FEMALE, RIGHT ANGEL, SOLDER TYPE
    SMP FEMALE, RIGHT ANGEL, SOLDER TYPE

    Bo-Jiang's SMP connectors are compatible with all kinds of SMP connectors, including Corning Gilbert's GPO™ products. SMP female RF/Microwave coaxial connectors for soldering type are available in semi-rigid cable group include 0.085", 0.086" and 0.047". In electrical specification, the impedance in 50 ohm, the frequency is DC to 18GHz in right angle shaped, the working voltage is 335 VRMS and the dielectric withstanding voltage is 500 VRMS.VSWR (Voltage Standing Wave Ratio) is 1.2 maximum form DC~ 18GHz.

  • SMP FEMALE, SOLDER TYPE
    SMP FEMALE, SOLDER TYPE

    Bo-Jiang's SMP connectors are compatible with all kinds of SMP connectors, including Corning Gilbert's GPO™ products. SMP female RF/Microwave coaxial connectors for soldering type are available in semi-rigid cable group include 0.085", 0.086" and 0.047". In electrical specification, the impedance in 50 ohm, the frequency is DC to 40GHz in straight shaped, the working voltage is 335 VRMS and the dielectric withstanding voltage is 500 VRMS.VSWR (Voltage Standing Wave Ratio) is 1.2 maximum form DC~ 18GHz, VSWR is 1.35 maximum from 18GHz ~ 26.5GHz, VSWR is 1.7 maximum form 26.5GHz ~ 40GHz.

  • SMP BULLET Adaptor
    SMP BULLET Adaptor

    Bo-Jiang's SMP connectors are compatible with all kinds of SMP connectors, including Corning Gilbert's GPO™ products. To apply in a board-to-board system using a floating bullet adaptors and also offers a full range of in-series, between series RF coaxial adaptors. In electrical specification, the impedance in 50 ohm, the frequency is DC to 40GHz in straight shaped, the working voltage is 335 VRMS and the dielectric withstanding voltage is 500 VRMS.VSWR (Voltage Standing Wave Ratio) is 1.3 maximum form DC~ 26.5GHz, VSWR is 1.5 maximum form 26.5GHz ~ 40GHz.

  • SMPM MALE, PCB MOUNT
    SMPM MALE, PCB MOUNT

    For application in higher density, Bo Jiang provides mounting type of SMPM male connectors for printed circuit board what you design to solder in a footprint on the PCB.

  • SMPM MALE EDGE LAUNCH, SMT TYPE
    SMPM MALE EDGE LAUNCH, SMT TYPE

    In higher density solution, Bo Jiang develops board edge type of SMPM male RF connector for surface mounting process.

  • SMPM FEMALE RIGHT ANGLE, SOLDER TYPE
    SMPM FEMALE RIGHT ANGLE, SOLDER TYPE

    Bo-Jiang's SMPM connectors are compatible with all kinds of SMPM connectors, including Corning Gilbert's GPPO™ products. SMPM female RF/Microwave coaxial connectors for soldering type are available in semi-rigid cable group include 0.047", designs in straight configurations. In electrical specification, the impedance in 50 ohm, the frequency is DC to 20GHz in straight shaped, the dielectric withstanding voltage is 335 VRMS.VSWR (Voltage Standing Wave Ratio) is 1.5 maximum form DC~ 20GHz; the insulation resistance is 5000 milliohms minimum. In mechanical sepcification, the force to engage is 19 N maximum for full detent mode; the force to engage is 11 N maximum for smooth bore mode. The force to disengage is 29 N maximum for full detent mode; the force to disengage is 11 N maximum for smooth bore mode.

  • SMPM FEMALE, SOLDER TYPE
    SMPM FEMALE, SOLDER TYPE

    Bo-Jiang's SMPM connectors are compatible with all kinds of SMPM connectors, including Corning Gilbert's GPPO™ products.. SMPM female RF/Microwave coaxial connectors for soldering type are available in semi-rigid cable group include 0.047", designs in straight configurations. In electrical specification, the impedance in 50 ohm, the frequency is DC to 18GHz in straight shaped, the working voltage is 335 VRMS and the dielectric withstanding voltage is 500 VRMS.VSWR (Voltage Standing Wave Ratio) is 1.3 maximum form DC~ 18GHz.; the insulation resistance is 5000 milliohms minimum. In mechanical sepcification, the force to engage is 19 N maximum for full detent mode; the force to engage is 11 N maximum for smooth bore mode. The force to disengage is 29 N maximum for full detent mode; the force to disengage is 11 N maximum for smooth bore mode.

  • SMPM FEMALE TO FEMALE ADAPTOR
    SMPM FEMALE TO FEMALE ADAPTOR

    For application in board to board, Bo Jiang builds a solution of bullet type of SMPM adaptor.

  • SMPM FEMLAE PCB MOUNT
    SMPM FEMLAE PCB MOUNT

    For application in higher density, Bo Jiang provides mounting type of SMPM female connectors for printed circuit board what you design to solder in a footprint on the PCB.

  • 1.85mm FEMALE TO SMPM FEMALE RF ADAPTOR
    1.85mm FEMALE TO SMPM FEMALE RF ADAPTOR
  • 1.85mm FEMALE TO SMPM MALE RF ADAPTOR
    1.85mm FEMALE TO SMPM MALE RF ADAPTOR
  • 1.85mm MALE TO SMPM FEMALE RF ADAPTOR
    1.85mm MALE TO SMPM FEMALE RF ADAPTOR
  • 1.85mm MALE TO SMPM MALE RF ADAPTOR
    1.85mm MALE TO SMPM MALE RF ADAPTOR
  • 2.92 mm (K) FEMALE TO SMPM FEMALE ADAPTOR
    2.92 mm (K) FEMALE TO SMPM FEMALE ADAPTOR
  • 2.92 mm (K) FEMALE TO SMPM MALE ADAPTOR
    2.92 mm (K) FEMALE TO SMPM MALE ADAPTOR
  • 2.92 mm (K) Male to SMP Female Adaptor
    2.92 mm (K) Male to SMP Female Adaptor

    We provide Other-Series adaptors include SMP and 2.92mm, between in the same gender and the different gender for your various applications. In electrical specification, the impedance in 50 ohm, the frequency is DC to 40GHz in straight shaped, the dielectric withstanding voltage is 500 VRMS.VSWR (Voltage Standing Wave Ratio) is 1.25 maximum form DC~ 40GHz. In mechanical specification, force to engage is 0.23Nm maximum in 2.92mm; force to engage is 68 N maximun for full detent mide of SMP; force to engage is 45 N maximun for limited detent mode of SMP; force to engage is 9 N maximun of smooth bore mode of SMP. The force to disengage is 0.23 Nm minimum for 2.92mm; force to disengage is 22N minimum for full detent mode of SMP; force to disengage is 9 N minimum for limited detent mode of SMP; force to disengage is 2.2N minimum for smooth bore mode of SMP. Durability (Mating) is 500 cycles minimum for 2.92mm; durability (mating) is 100 cycles minimum for full detnet mode of SMP; durability (mating) is 500 cycles minimum for limited detent mode of SMP; durability (mating) is 1000 cycles for smooth bore mode of SMP.

  • 2.92 mm (K) MALE TO SMPM FEMALE ADAPTOR
    2.92 mm (K) MALE TO SMPM FEMALE ADAPTOR
  • 2.92 mm (K) MALE TO SMPM MALE ADAPTOR
    2.92 mm (K) MALE TO SMPM MALE ADAPTOR
  • SMP Microwave/RF coaxial series phase and amplitude stable cable assemblies
    SMP Microwave/RF coaxial series phase and amplitude stable cable assemblies

    Bo Jiang offered different function of high performance RF/Microwave coaxial cable assemblies to suit various testing environment. Bo Jiang's RF/ microwave coaxial cable assembly series provides superior quality for reliable test and measurement of microwave and millimeter wave signals. We produces these high performance percision SMP series cable assemblies with extremely stable phase and amplitude for various applications. These flexure cables also provide outstanding durability and stability for daily measurement.

Result 1 - 24 of 49
123